Concrete pump is a kind of mechanical equipment commonly used by many construction parties, which can greatly increase the power of construction. In the construction, if the concrete pump operation is not standard, it is likely to cause all kinds of safety hazards to appear. How to prevent this? This is a problem that many construction parties are very concerned about.
Experts point out: When the concrete pump is in operation, the pumping equipment and pipelines should be investigated, and hidden dangers should be dealt with in time. In the construction process, we must not blindly pursue the construction power and ignore some hidden safety hazards. Keep in mind that the safety of engineering operations must be the first priority. So what are the hidden safety hazard requirements in the actual use of concrete pumps ? How about it? Now we introduce as follows:
1. Pipes, clamps, seals, etc. that are worn beyond the rules should be replaced in a timely manner. Avoid clogging the pipes.
2. The pumped concrete should be evenly mixed to control the slump.
3. During the pumping process, do not stop the pump halfway. Various instruments and indicators should be monitored at any time, and abnormalities should be adjusted or handled in time.
4. When the conveying pipe is blocked, the anti-pump work should be performed to bring the concrete back to the hopper. When the anti-pump fails to eliminate the blockage several times, the pipe should be disassembled to remove the blockage when the pump is unloaded.
Concrete pumps have been widely used by major construction units. How to prevent hidden dangers of concrete pumps in time in construction? With the above introduction, we trust that a wide range of users now understand this issue.