Welcome to the website of Yantai Pengda Construction Machinery Co., Ltd.!
Concrete pump | Concrete shotcrete pump-Yantai Pengda Construction Machinery Co., Ltd.
Concrete pump
Concrete shotcrete pump
Concrete pump
Concrete pump
Industry Information
How to check the concrete pump?
Source: http://braprogram.com 2019-7-8 22:53:06

The service life of concrete pumps has always been a concern of the majority of construction parties. To extend the service life of concrete pumps , we must pay attention to the maintenance of concrete pumps . So how to check the concrete pump ? This is a problem that many construction parties are very concerned about.

Experts point out that the inspection of concrete pumps is usually based on different parts and inspection cycles. Many customers only know that they pay attention to daily maintenance. In general, like some easily damaged parts, the inspection cycle will be shorter. For some fixed parts, the inspection cycle is longer. Specifically, the inspection cycle of the main parts of the concrete pump is as follows:

1. Daily inspection Daily inspection includes damage and deformation of external appearance, loose parts exposed, changes in operation and performance, oil leakage, damage to hoses, lack of lubricating grease at lubrication points, and unsafe driving factors.

2. Monthly inspection When pumping 2,000 cubic meters of concrete or every month, you can do the following inspections, such as damage to the slide valve, wear of the pipe, reduction of hydraulic oil, forced lubrication of lubrication points, routine maintenance of automobile parts, etc.

3. Semi-annual inspection If the pumped concrete is 12,000 cubic meters or half a year, you can do the following inspections, such as damage to the lower valve casing, the delivery cylinder, deterioration of electrical components, hydraulic oil, damage to the boom and routine maintenance of the automobile part.

4. Annual inspection If the pumped concrete reaches 24,000 cubic meters or one year, the following inspections can be done, such as mixing device, mixing oil motor, slewing oil motor, water pump, oil pumps, replacement of hydraulic oil, etc. all need to be checked.

The use of concrete pumps has greatly improved the efficiency of construction. How to check the concrete pump ? Through the above introduction, I believe that the majority of users already understand this issue.

Related information and recommended products
Copyright: Yantai Pengda Construction Machinery Co., Ltd. Sales Hotline: 13723958255 (Same as WeChat)
Copyright: Shandong-Yantai-Haiyang Industrial Park