Welcome to the website of Yantai Pengda Construction Machinery Co., Ltd.!
Concrete pump | Concrete shotcrete pump-Yantai Pengda Construction Machinery Co., Ltd.
Concrete pump
Concrete shotcrete pump
Concrete pump
Concrete pump
Industry Information
How to maintain the concrete pump battery?
Source: http://braprogram.com 2019-9-25 18:28:06

The battery of the concrete pump is a very important part of the concrete pump , which plays a very important effect in the construction. To ensure the normal operation of the concrete pump , it is necessary to perform outstanding maintenance on the concrete pump battery. So how to maintain the concrete pump battery? This is a problem that many construction parties are very concerned about.

Experts point out that if the concrete pump battery is properly maintained, it will bring great assistance to the construction of the concrete pump . In the later stage, the concrete pump battery can bring great effects to the concrete pump . So how to maintain the concrete pump battery during construction? Specifically, the maintenance of the concrete pump battery can be carried out from the following aspects:

1. Analyze the power consumption of the concrete pump and control the terminal voltage of the generator within the specified scale. For example, the mechanical charging operation often during the day is long and the discharging time is short. To prevent the problem of overcharging, the charging current should be appropriately reduced; for vehicles operating at night and frequently started, to prevent the excessive discharge, try to increase the charging current appropriately It should be enough when parked for next use.

2. Pay attention to the temperature conditions of concrete pump operation. In the cold area, we must pay attention to the thermal insulation of the battery, and choose a reasonable density of the electrolyte to keep it in a sufficient state. Fill with distilled water during charging to prevent freezing. The engine should be warmed up before the start, and the engine should be used correctly. It should not exceed 5S at each start time. The restart should be 15S away. The engine cannot be started for two consecutive times. The fault should be removed before starting.

3. Strengthen the maintenance of the battery. If only used and not maintained, coupled with the poor condition of the battery (large vibration, dust pollution), the result is clear.

Concrete pump is a kind of mechanical equipment that is used a lot in the current construction. How to maintain the concrete pump battery in daily life? Through the above introduction, I trust the majority of users to understand this issue now.

Related information and recommended products
Copyright: Yantai Pengda Construction Machinery Co., Ltd. Sales Hotline: 13723958255
Copyright: Shandong-Yantai-Haiyang Industrial Park